SLSD

SLSD

APPLICATION

The SLSD series supply & return linear slot diffusers offer high performance in a VAV outlet with pattern control and complete blank-off true design flexibility.
Designed for efficient air distribution at cooling differentials up to 30°F.

FEATURED STANDARD CONSTRUCTION

SLSD with deflector & damper as supply linear slot diffuser.
• FRAME:
- Constructed from extruded aluminum alloy 6063-T5 of 1.2 mm thickness.
• Surface/Flush mounting - Wide border.
•Angle end cap is provided.
• FRAME PARTITION:
- Constructed from extruded aluminum alloy 6063-T5 of 1.2 mm thickness.
• FIXED & SLIDING DAMPER:
- Constructed of extruded aluminum of 1 .2 mm thickness of 3/4” & 1”slot spacing.
- By offseting the holes, the airflow rate can be reduced or can even work as blank off for dummy parts.
- Damper works also as equalizing grid.
- Damper color : Black.
- The sliding damper controls the distribution of the airflow.
• DEFLECTORS:
- The fully adjustable deflection blades allow for air pattern to be controlled from vertical straight down to horizontal along the ceiling.
• SIZES:
- Minimum length of 8”
- Length up to 114” full section for slot number between 1 and 6.
- Length up to 80” full section for slot number greater than or equal to 7.
- Multi-sections are joined with alignment strips for continuous appearance.
• FINISHING:
- Standard finish is white color ( RAL 9010 ) for frame, frame partition and blades.
- Join strip provided for continuous slots.

OPTIONS

• Frame is available in surface, lay-in T-bar & narrow borders.
• Insulated or non-insulated plenum box.
• Mounting Bracket.
• Open end, Flush end & Mitered cap are available.
• Mitered corner for ceiling & wall application ( 90° angle or any special angle ).
• Curved for ceiling application.
• FC field cut.
• BO metal blank-off.
• LS light shield.
• LSC straightened core.
• D: with damper w/o deflector.
• DF: with deflector w/o damper.
• W/O damper nor deflector.